# Default config for sway
#
# Copy this to ~/.config/sway/config and edit it to your liking.
#
# Read `man 5 sway` for a complete reference.

### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4
# Home row direction keys, like vim
#set $left Left 
#set $down Down
#set $up Up
#set $right Right
# Your preferred terminal emulator
set $term alacritty
# Your preferred application launcher
# Note: pass the final command to swaymsg so that the resulting window can be opened
# on the original workspace that the command was run on.
set $menu wofi

### Output configuration
#

# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
# output * bg ~/.selfconfigs/sway/wallpaper.png fill
set $wallpapers_path $HOME/.selfconfigs/sway/wallpapers
output * bg `find $wallpapers_path -type f | shuf -n 1` fill

#
# Example configuration:
#
#   output HDMI-A-1 resolution 1920x1080 position 1920,0
#
# You can get the names of your outputs by running: swaymsg -t get_outputs

### Window frame configuration
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
#font pango:monospace 8

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
font pango:DejaVu Sans Mono 9

#border settings: 1px with those on the side of a display hidden
default_border normal 1
hide_edge_borders both

#colors
client.focused          #000000cc #b5bd68cc #000000ff #000000cc #000000cc
client.focused_inactive #000000cc #000000cc #ffffffcc #000000cc #000000cc
client.unfocused        #000000cc #000000cc #ffffff7f #000000cc #000000cc

### Idle configuration
#
# Example configuration:
#
# exec swayidle -w \
#          timeout 300 'swaylock -f -c 000000' \
#          timeout 600 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \
#          before-sleep 'swaylock -f -c 000000'
#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

### Input configuration
#
# Example configuration:
#
#   input "2:14:SynPS/2_Synaptics_TouchPad" {
#       dwt enabled
#       tap enabled
#       natural_scroll enabled
#       middle_emulation enabled
#   }
#
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.

### Key bindings
#
# Custom
#

# Audio
bindsym --locked --to-code $mod+BracketRight exec pamixer -i 5
bindsym --locked --to-code $mod+Backslash exec pamixer -d 5
bindsym --locked --to-code $mod+Equal exec pamixer -t
bindsym --locked --to-code $mod+Shift+BracketRight exec pamixer --set-volume 100
bindsym --locked --to-code $mod+Shift+Backslash exec pamixer --set-volume 50

# Keyboard
bindsym --locked --to-code $mod+u input type:Keyboard xkb_switch_layout next

# ScreenShot
bindsym --locked --to-code Print exec grim -g "$(slurp)" ~/screenshot.png 
bindsym --locked --to-code $mod+Print exec ~/.selfconfigs/sway/capture_current_window
bindsym --locked --to-code $mod+Shift+Print exec grim ~/screenshot.png

# Firefox
bindsym --to-code $mod+P exec firefox
bindsym --to-code $mod+Shift+P exec firefox --private-window
bindsym --to-code $mod+Shift+T exec torbrowser-launcher

# File explorer
bindsym --to-code $mod+A exec thunar

# Voice assistant
bindsym --to-code $mod+C exec ~/git/hestia/record.sh

#
# Basics:
#
    # Start a terminal
    bindsym $mod+Return exec $term

    # Kill focused window
    bindsym $mod+Shift+q kill

    # Start your launcher
    bindsym $mod+d exec $menu

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Reload the configuration file
    bindsym $mod+Shift+c reload

    # Exit sway (logs you out of your Wayland session)
    bindsym $mod+Shift+e exec swaymsg exit
#
# Moving around:
#
    # Move your focus around
 #   bindsym $mod+$left focus left
 #   bindsym $mod+$down focus down
 #   bindsym $mod+$up focus up
 #   bindsym $mod+$right focus right
    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # Move the focused window with the same, but add Shift
 #   bindsym $mod+Shift+$left move left
 #   bindsym $mod+Shift+$down move down
 #   bindsym $mod+Shift+$up move up
 #   bindsym $mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right
#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace number 1
    bindsym $mod+2 workspace number 2
    bindsym $mod+3 workspace number 3
    bindsym $mod+4 workspace number 4
    bindsym $mod+5 workspace number 5
    bindsym $mod+6 workspace number 6
    bindsym $mod+7 workspace number 7
    bindsym $mod+8 workspace number 8
    bindsym $mod+9 workspace number 9
    bindsym --to-code $mod+0 workspace number 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace number 1
    bindsym $mod+Shift+2 move container to workspace number 2
    bindsym $mod+Shift+3 move container to workspace number 3
    bindsym $mod+Shift+4 move container to workspace number 4
    bindsym $mod+Shift+5 move container to workspace number 5
    bindsym $mod+Shift+6 move container to workspace number 6
    bindsym $mod+Shift+7 move container to workspace number 7
    bindsym $mod+Shift+8 move container to workspace number 8
    bindsym $mod+Shift+9 move container to workspace number 9
    bindsym --to-code $mod+Shift+0 move container to workspace number 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+v splith
    bindsym $mod+b splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

    # Make the current focus fullscreen
    bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+Shift+space focus mode_toggle

    bindsym $mod+Ctrl+space sticky toggle

    # Move focus to the parent container
    # bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym --to-code $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym --to-code $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
#    bindsym $left resize shrink width 10px
#    bindsym $down resize grow height 10px
#    bindsym $up resize shrink height 10px
#    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"

#
# Status Bar:
#
# Read `man 5 sway-bar` for more information about this section.
# bar {
#    position top
#
#    # When the status_command prints a new line to stdout, swaybar updates.
#    # The default just shows the current date and time.
#    # status_command while true; do { swaymsg -t get_inputs | jq '.[7].xkb_active_layout_name' | cut -c 2-3; date +'%Y-%m-%d, %A  %H:%M:%S ' } | tr "\n" " " ; echo ; sleep 1; done
#    status_command while date +'%Y-%m-%d, %A  %H:%M:%S '; do sleep 1; done
#    #status_command while date +'%s '; do sleep 1; done
#
#    colors {
#        statusline #ffffff
#        background #323232
#        inactive_workspace #32323200 #32323200 #5c5c5c
#    }
#}

for_window [shell="xwayland"] title_format "[XWayland] %title"

exec waybar

exec pavucontrol

assign '[app_id="pavucontrol"]' workspace number 10

assign '[app_id="ws2"]' workspace number 2

exec $term --class ws2 -e zsh -s newsboat
exec firefox

include /etc/sway/config.d/*
include ~/.config/sway/additional.d/*